Tube Condenser Microphone
Coveted
& Rare. Until Now.
The
WA-CX12 is a faithful recreation of the most natural and balanced
tube mic of all time, lauded for its organic tone and pleasing top
end. The original AKG C12 was produced in Austria from 1953 - 1963
and is the definitive version of the 12-style mic. The WA-CX12 sound
profile and circuit design is inspired by the original production run
of only 2500 mics, which are highly coveted for their ability to
capture the natural beauty of vocal performances, room sounds, and
other far miking techniques. The list of famous recording artists who
have never used a 12-style microphone is likely shorter than the list
of those who have. Some of the most notable artists to create music
with the original include The Beatles, Lupe Fiasco, Tom Petty,
Michael Jackson, Alanis Morissette, and Taylor Swift, just to name a
few. The WA-CX12 cuts no corners in achieving the highly coveted
open, airy, and natural sound profile used over and over again by
some of the world’s most recognized engineers and artists.
No-Compromise
Components
The
WA-CX12 is a professional large-diaphragm tube microphone with
premium components, elite build quality, and is hand-inspected in
Austin, Texas. The circuit design of the WA-CX12 is faithful to the
original production run from 1953-1963, and serves as the basis for
the historically accurate sound profile. Like the original, the
WA-CX12 tone is mostly flat until a slight dip at 2kHz with a gradual
boost between 5-10kHz. At the beginning of the chain, the CX12 has an
edge-terminated, all-brass CK12-style capsule, that stays true to the
frequency response of the original-run 12-style microphones. This
capsule allows the WA-CX12 to have 9 polar patterns with the typical
cardioid, omni, and figure-8, in addition to 6 intermediate patterns.
. Moving down from the capsule, the WA-CX12 uses a premium 12AY7
vacuum tube for added warmth. At the end of the circuit, the WA-CX12
uses a custom TAB-Funkenwerk (AMI) USA Output Transformer, which
gives the WA-CX12 a very full, wide, and open sound, getting the most
out of the capsule and additional circuit components. The WA-CX12 has
premium capacitors throughout, and a no-solder mask board for the
lowest noise possible. As with all Warm Audio products, we focus
heavily on quality components to ensure we release the best sounding
product possible.
True
To Legacy, True To Sound
The
WA-CX12 sound profile is known for capturing the real sound of a
performance. Designed to provide clarity in the midrange and smooth
out any high end harshness, the WA-CX12 delivers professional solo
vocals, intricate piano performances, and epic, natural room sounds.
Vocals
The gently tuned 5-10kHz boost of the WA-CX12 accentuates and smoothes out the upper register in many vocal performances.
Piano
One of the more popular studio uses for the original 12-style microphone is as a stereo pair on grand piano. Because of the mic’s relatively flat frequency at 0dB until the top-end boost kicks in, the WA-CX12 adds just the right amount of pristine high end to a piano performance.
Room
Sounds
Whether it’s room reflections, splashy cymbals, or guitar & bass cabinets - mixing in a distant WA-CX12 can bring a natural “live” sound to professional recordings.
WA-12-B-60V
CK12-Style Capsule
The
wa-12-b-60v ck12-style capsule accurately matches the frequency
response of the original capsule found in vintage c12 mics. This
capsule captures incredible detail across the 30hz-20khz frequency
response. With a remarkably flat response until the top-end boost
starts to hit around 3k, the capsule inside the wa-cx12 will help you
capture natural sounds with some added top-end smoothness before the
pleasant 19khz rolloff.
AMI USA-MADE Output Transformer
The history of tab-funkenwerk (ami) transformers goes all the way back to the founding of the most sought-after german analog audio innovations. The tab (ami) transformer in the wa-cx12 is american-made with large-core german laminations and built to exacting standards as designed by oliver archut. The custom transformer drives the full natural sound captured by the capsule delivering that renowned austrian sound.
Premium Tubes, Capacitors, & Boards
The wa-cx12 uses a premium 12ay7 vacuum tube that adds warmth and depth to the microphone’s signal. Like all warm audio products, we use premium capacitors in the circuit for ideal signal transfer. The pcb board in the wa-cx12 does not have solder masks which allows for the lowest noise floor possible, preventing crosstalk from added capacitance.
Authentic Appearance, Elite Build Quality, Premium Accessories
The wa-cx12 is encased in an ultra-durable nickel-plated brass body. Every wa-cx12 comes with a custom tweed carrying case housing the mic, wood mic case, premium gotham 7-pin cable, iec cable, shockmount, and external power supply. Every wa-cx12 is meticulously hand-inspected at warm hq in austin,tx by real musicians and engineers with a passion for superior sound.
Technical Specifications:
Custom Edge Terminated, All-Brass Vintage CK12-Style Capsule
Custom TAB-Funkenwerk (AMI) USA Output Transformer
Premium 12AY7 Vacuum Tube
Premium Capacitors
Polar Patterns: 9 Patterns - Cardioid, Omnidirectional, Figure-8, + 6 Additional Mixed Patterns
Max SPL: 149dB
Frequency Response: 30Hz-20kHz
Output Impedance: 200 Ohms
Signal-To-Noise Ratio: 73dB
EIN / Self-Noise: 32dBA
Total Weight: 17 Lbs, Mic Only: 2lbs 7oz
Mic Dimensions: 11 ⅝” X 2” (29.5cm X 5cm)Included Accessories: Custom Tweed Carrying Case, External IEC Grounded PSU, IEC Power Cable, Premium Gotham 5 Meter 7-Pin Tube Microphone Cable, Wood Microphone Box, Shockmount
Warm Audio WA-CX-12
- Product Code: WA-CX-12
- Availability: Pre-Order
-
$1,418.58
Tags: Warm Audio WA-CX-12