Set with elastic suspension 

The “V4 USM Set” contains the microphone, a wooden case and the USM-V4 elastic suspension. 

Studio Vocal Microphone 

New small-diaphragm capsule architecture, with bevelled collar for controlling the polar response. 

Warm, clear sonic character with smoothly rolled-off diffuse-field response. 

Capsule head with adjustable tilt angle. 

Optimal on-axis frequency response featuring a mild high-frequency lift. 

Very smooth polar response; carefully-controlled narrowing of the pattern at high frequencies. 

Diffuse-field response parallel to the 0° response, with a gentle roll-off at high frequencies. 

Newly designed electronics offer a very high maximum sound pressure level.   

Tech Spec –  

Pickup pattern:Cardioid 

Frequency range:50 Hz - 22 kHz 

Sensitivity:-36 dB (V/Pa), 16 mV/Pa 

Equivalent noise level (A-weighted):15 dB 

Equivalent noise level (CCIR) :25 dB 

Signal-to-noise ratio (A-weighted) :79 dB 

Maximum sound pressure level (THD < 0.5 %) :144 dB-SPL 

Maximum output voltage :4.8 V (13 dBV) with 1 kΩ load 

Low cut filter :40 Hz, 18 dB/oct. 

Minimum recommended load impedance :1 kΩ 

Output impedance :50 Ω 

Maximum cable length :> 300 m 

SCHOEPS RFI Shield :Yes 

Powering standard / Valid range :P 48 / >43 V 

Current consumption :3.3 mA 

Common mode rejection ratio (at 1 kHz) :> 80 dB 

Output :XLR-3M, analog, 1 channel 

Length :194 mm 

Diameter :34 mm 

Width of the capsule head :45 mm 

Head swivel degree span :+/- 20° 

Weight :302 g 

Surface finish :blue, gray