Antelope Audio 10MX
₫159,336,036.02
10MX
The hottest member of the Antelope Audio Isochrone family
Terms and Conditions (Please make sure that you have read and understood our terms and conditions prior to purchase at our Terms and conditions of use page located at the bottom.)
Delivery Policy
Return and Exchange Policy (Goods sold are non-refundable. If there is any manufacturing defects, please check out our exchange, warranty policy to get the goods replaced.)
10MX features the atomic precision of 10M and Trinity’s groundbreaking jitter management algorithm
10MX is the newest and the premier member of the Isochrone family. It features technologies from two of Antelope’s legendary products. The atomic precision of the 10M and the sophisticated jitter-management algorithm of Trinity are combined in a futuristic, 1U rack space enclosure, providing the world’s most stable and musical clocking.
10MX is a fusion of proven technologies and contemporary industrial design, where no compromises are allowed and both build-quality, and performance-excellence are top priority. The new Rubidium Atomic Clock is an epiphany of more than 20 years’ expertise in the digital audio world, making vividly real the clarity, depth, width and 3-dimensionality distinctive of the analog sound.
4 WORD CLOCK OUTPUTS
The master clock beast: 4 Word Clock outputs allowing up to 768 kHz
64-BIT ACOUSTICALLY FOCUSED CLOCKING
Flawless clocking powered by Antelope Audio’s world-renowned jitter management algorithm
MULTIPLE ATOMIC OUTPUTS
The 10MX’s multiple atomic outputs allow up to 10 devices to be simultaneously clocked
ADDITIONAL OUTPUTS
2 x S/PDIF and 2 x AES/EBU master clocking outputs up to 192 kHz
MAXIMUM CONTROL
Intuitive Software Control Pane
PC/MAC CONNECTION
PC/Mac connection via USB, allowing remote control and firmware upgrades
10MX fits any studio environment – from recording to mixing and mastering
10MX is perfectly suited for recording, mixing and mastering environments. Its form factor, occupying only 1U of rack space, makes it ideal for live sound application where rack slots are precious commodity.
The multiple atomic outputs allow up to 10 devices to be clocked simultaneously over BNC outputs of 10MHz. The unit can also be used as a master clock with 4 outputs, supporting the outstanding sampling rate of up to 768 kHz via BNC. Two more clocking outputs are available via AES and two via S/PDIF.
Phase Noise (SSB) |
1Hz ≤-70 dBc/Hz
|
Short-Term Stability
|
t=1s ≤3E-11
|
Warm-Up Time |
8 – 10 minutes (depends on ambient temperature)
|
Word Clock Input |
1 x Word Clock Input @ 75 Ohms 3Vpp on BNC 44.1 – 384kHz
|
Maximum shock withstanding |
Non-operating, flight case mounted:
|
Outputs |
Word Clock: 4 x BNC
|
Word Clock Outputs |
4 x Word Clock Outputs @ 75 Ohms 3Vpp on BNC 44.1 – 768 kHz square wave signal
|
USB I/O |
USB 2.0 Hi-Speed; Data stream up to 480Mbits/384kHz, Type B
|
Clocking System |
4th Generation Acoustically Focused Clocking
|
Clock Stability |
<+/-0.0 2 PPM, oven controlled at 64.5 °C |
Atomic Reference Type |
Rubidium Ultra-Stable Resonance-Controlled Master Oscillator
|
Frequency |
10 MHz |
Frequency Accuracy |
Better than ±5E-11 @25C (±0.05 PPB) |
Aging |
Daily* ±2.5E-11
|
Atomic Clock Outputs |
10 x BNC Sinusoidal, 10MHz, 75 Ohm, 1Vpp typical (unload)
|
Sample Rates (kHz)
|
32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 768
|
Word Clock Specs |
TTL Level, 75 Ohm Output Impedance |
USB |
USB 2.0 Full-Speed, Type B, only for control |
Operating Temperature |
0-50°C, 32-122°F |
Weight |
2.8 kg/6.17 lb |
Dimensions |
482.6 (W) х228 (D) х 44 (H) mm
|
Power Supply |
AC |
Power Consumption |
15 W |
Humidity |
30 – 80% RH non-condensing |
Power Supply Input |
100 – 240 V~ |
SYSTEM REQUIREMENTS
Windows
OS: Windows 7/8/8.1/10
Disk Space: Minimum 512 MB available disk space
USB: 1x USB 2.0 Port
Required USB bandwidth (for firmware update): 80%-90%
CPU: Intel or AMD equivalent CPU with at least 2GHz operating frequency
Memory (RAM): 4GB Minimum (8GB or more Recommended)
MAC
OS X: 10.9/10.10/10.11/10.12 (Sierra Recommended)
Disk Space: Minimum 512 MB available disk space
USB: 1x USB 2.0/3.0 Port
Required USB bandwidth: 80%-90%
Memory(RAM): 4GB Minimum (8GB or more recommended)
CPU: Intel Core 2 Duo (Minimum) Intel Core i3 ™ or higher (Recommended)
FOR MORE INFORMATION AND TECHNICAL SPECIFICATIONS CLICK HERE
1 Item
10MX
The hottest member of the Antelope Audio Isochrone family